The End of the Road

The bathroom is officially completed! As usual, several steps took much longer than we had hoped. The grouting and sealing went well, and there were no surprises there. Each coat of sealant in small areas like this takes less time to apply than to clean up from. A day needs to pass in between coats, and we were aiming for three coats. Luckily, this is a task custom made for weeknights after work. Our first unexpected roadblock was with the light fixture. When we took down the old one, we found that there was no junction box behind it. Putting in a junction box isn't usually too hard, so we didn't think this would be much of an issue. Oh, little did we know. When I started looking seriously at planning the junction box installation, I realized that with the location of studs and pipes it was going to be more off center than expected (and a bit of a challenge to put in.) When we held up our light to the actual location it be in, we found that it was too wide and would be hitting the wall on one side. Back to the drawing board (or lighting store, as the case may be.) It took us a week to find a light we liked, and since that was in a catalog it took another week for delivery. It's these little extra bits that are killer to projects and really drag them out. We had tried to be good about getting everything in advance but alas, twas not to be.

While waiting for the light I put in the junction box. For various boring technical reasons, this was quite difficult, but after creating several jigs and after several attempts, I got it where I wanted it. The light arrived and looked great in the space, so at least there's a happy ending. The light fiasco delayed our painting of the walls, because we needed to patch around the new junction box but I wanted to actually have the light to verify that it was good where it was. I had images of having to redo the box and the patching around it dancing through my head, but luckily those didn't come to fruition. With the patching done, we painted and headed into the home stretch of what we hoped would be simple installations. First up was the vanity and sink. Plumbing projects require saints' patience, and since I know this I always go in planning on having to make several trips to the store. My goal this time was to only have to do three, and I met (but didn't exceed) that goal. Our water shutoffs are very odd sizes, and it took two Home Depot trips and a trip to the real plumbing store (who I really should have just started with) before I got the right bits. With those in hand, I plumbed the various bits together (this was in the afternoons after pastry camp) and got the vanity in place and the sink secured. Other than a drip from a bad shutoff valve (which required a shockingly expensive plumber visit) it went well and everything worked on the first try.

From here on out it was smooth sailing -- The toilet went in without a hitch, the last trim pieces went up cleanly, and all of the towel bars and whatnot fit like a dream. We are very happy with how the bathroom turned out, and generally happy with how the renovation went. We certainly would have preferred fewer plumbing trips and not to have the light issues, but in the end nothing huge and irreversible went wrong, and what else can one really ask for?